Chilipepper On-Demand Recirculation Pump For Faster Hot Water!
What is the Chilipepper?
The Chilipepper Hot Water Recirculation Pump is a small appliance that quickly circulates the hot water from the water heater to your sink or shower without wasting any water down the drain. A simple touch of a button activates the Chilipepper and once the on-board temperature sensor detects sufficiently hot water it turns itself off! Voila! You’ve got hot water with practically no wait and zero waste.
Almost Instant Hot Water!
The Chilipepper eliminates the need to run the faucet for several minutes to get hot water. Upon activation, the high-power pump circulates the water from the water heater – whether thankless, tank-type or other – to the faucet. And there’s no need to even open the faucet but if you need to use the water while the pump is running, No Problem! The sink and faucet still work the same as before. Best of all, there’s no fuss! When the hot water arrives, the Chilipepper turns itself off, leaving you free to just enjoy your hot water. Learn more… How it works
Eliminate Waste – Save Water!
The Chlipepper recirculates the cool water from the hot water line back to the water heater to be reheated instead of running it down the drain. Eliminating that wasted water saves thousands of gallons of water every year. A typical family of 4 can save over 12,000 gallons of water per year! Not running that water down the drain reduces the amount of sewage that needs to be treated as well!
One of our customers had this to say about his family’s water savings after using the Chilipepper:
just wanted to report back to you about our CP6000. we have been using it
for about 6 months, and couldn’t be more satisfied with it. our monthly
water usage has dropped an average of 800 gallons. that’s 20%!
The Chilipepper is a Green product because, in addition to saving water, it uses less than $2 in electricity per year to operate. Conserve Water, Energy, and Reduce your Carbon Footprint while Saving Time and Money!
Another of our customers commented:
Works with Any Type of Water Heater!
The Chilipepper works with any kind of water heater at all, from a traditional tank-type water heater to solar and even oil-fired boiler type heaters. The Chilipepper even works with tankless water heaters! In fact, the Chilipepper greatly improves the convenience of tankless water heaters, which provide endless hot water but with and incredibly long wait! Water Heater manufacturers Bosch and Rinnai have both tested the Chilipepper system and approved it for use with their tankless water heaters.
Designed for the Do-It-Yourselfer, the Chilipepper is easy to install even by the most novice homeowner. It is designed to sit or mount under a sink and connect to your water supply with flexible stainless steel hoses – so it doesn’t require any alterations to your existing plumbing. The Chilipepper comes with everything you need to install it, except for 2 lengths of stainless steel flexible hose which are readily available at any hardware store. Please take a look at the installation instructions to see just how simple the installation is. The installation instructions can be viewed from the menu above. Also, find out where the best location for your Chilipepper would be, and how many other fixtures it may affect with this Test Your Plumbingpage.
Many water companies offer rebates for customers who install hot water recirculation systems like the Chilipepper – some as much as $200! That would be like getting a Chilipepper for FREE! Check with your local water company to see if they have any rebate programs..